N14 Celect and Celect Plus resealing

N14 Celect and N14 Celect Plus circuit board cleaning and resealing

N14 Celect and Celect Plus clean, check, and reseal.

This service is unavailable at this time

The most common internal seal failure for the N14 Celect and N14 Celect plus ECMs are the connector gaskets. Due to the age of the average N14 ECM the gaskets tend to dry rot, crack and let oil or fuel into the ECM. We do not have a source for these gaskets however the RTV that we use to seal the DDECs works just fine. We can also reseal the boards in an N14 with our high quality conformal coating.